UniSeal ® - Solutions at Hand

Textured Synthetic Exam Gloves

PRINT PAGE

UniSeal® Nitrile Plus Exam Gloves are made from 100% soft nitrile, a synthetic compound that's completely free of skin-irritating rubber proteins. These leading-edge gloves conform to your hands far more comfortably than other non-latex alternatives, such as vinyl. So you get a cool, dry, precise fit, with far less hand fatique. UniSeal® Nitrile Plus Exam Gloves are also far more resistant to punctures and tears than either latex or vinyl and stand up to a variety of splashed chemicals, solvents, oils, and bases.

Type: Non-Sterile Examination Glove
Shape: Ambidextrous

   – Features
    • 8 mil thickness
    • 12" Extended Cuff
    • Thin Wall nitrile technology
    • More puncture-resistant
    • Superior Strength and
    durability
   • Textured finish for superior
    grip
    • Latex-Free
   • Excellent alternative to
    natural rubber latex
   • Higher resistance to certain
    chemicals or solvents
   • Bar-coded boxes and cartons
   • Dated Lot Codes for quality
    assurance and traceability
   • Safety Sealed Packaging
   • 50 Gloves/Box,
    10 Boxes/Case
   • CHEMO TESTED
   – Dimensions/Sizes
   – Quality Standard
   – Manufacturing Standard
   – Physical Properties

Ingredients: 100% NBR Nitrile butadiene synthetic rubber formulation

Dimensions (all measurements in mm)
Sizes	Item #	Glove Length	Palm width +/-10mm	Thickness
Sizes	Item #	Glove Length	Palm width +/-10mm	Cuff	Palm	Finger
Small	150-6	305	85	0.13	0.17	0.22
Medium	150-7	305	95	0.13	0.17	0.22
Large	150-8	305	105	0.13	0.17	0.22
X Large	150-9	305	115	0.13	0.17	0.22

Quality Standards

• Meets or exceeds the following standards: ASTM D3578-95 (USA), EN 455 (EEC), AS 40 (Australia), FDA, NFPA, UL
• Quality sampled in accordance with MIL.STD 105E
• ISO 9002 Certified Manufacturing

Manufacturing Standards
• Brand new state-of-the-art manufacturing plant with computer-controller market-leading technology.
Defect	Inspection Level	AQL
Pinholes (FDA 1000ml watertight test)	G-1	1.5
Visual Defects (major)	G-1	2.5
Visual Defects (minor)	G-1	4.0
Dimensions	S-2	4.0

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Tensile Strength (Mpa) ASTM Minimum Requirement

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Ultimate Elongation ASTM Minimum Requirement

PRINT PAGE