UniSeal ® - Solutions at Hand

Textured Synthetic Exam Gloves

PRINT PAGE

UniSeal® Low Protein Powder-Free Exam Gloves are top-of-the-line, low-protein gloves for maximum skin comfort. Each glove is double-chlorine washed by an American-made chlorinator to remove irritating protein from the latex. This results in extremely comfortable gloves that meet the demanding ISO 9002 manufacturing standard and pass the 200 Human Modified Draize Skin Allergy Test.

Available: Smooth or Textured
Type: Non-Sterile Examination Glove
Shape: Ambidextrous

   – Features
    • Low protein count
    • Smooth or Textured Finish
    • Ultra Clean
    • Consistent and reliable
       quality
    • Low modulus compound for
       maximum softness and
       comfort
   • Bar-coded boxes and
       cartons
    • Dated Lot Codes for quality
       assurance and traceability
    • Safety Sealed Packaging
    • 100 Gloves/ Box,
      10 Boxes/ Case
    • 1 Case = 1.198 Cubic Feet

   – Dimensions/Sizes
   – Quality Standard
   – Manufacturing Standard
   – Physical Properties

Ingredients: 100% Natural Rubber Latex concentrated and compounded with specification or formulation for high flexibility

Testing Method: RRIM Modified Lowry Microassay Test with precipitation of proteins using Tricholoroacetic and Phosphotungstic acids or ASTM standard Test Method D5712-95

Protein Level: Total protein content is 50 µg/g or less of total extractable protein, using modified Lowry assay for measuring total protein*

Dimensions (all measurements in mm)
Sizes	Item #		Glove Length	Palm width +/-10mm	Thickness
Sizes	Smooth	Textured	Glove Length	Palm width +/-10mm	Cuff	Palm	Finger
XSmall	010-5	011-5	240	75	0.14	0.16	0.18
Small	010-6	011-6	245	85	0.14	0.16	0.18
Medium	010-7	011-7	245	95	0.14	0.16	0.18
Large	010-8	011-8	245	105	0.14	0.16	0.18
XLarge	010-9	011-9	245	115	0.14	0.16	0.18

Quality Standards

• Meets or exceeds the following standards: ASTM D3578-95 (USA), EN 455 (EEC), AS 40 (Australia), FDA, CE
• Quality sampled in accordance with MIL.STD 105D
• ISO 9002 Certified Manufacturing
• Meets the Viral Penetration Test (ASTM F1671-97)

Manufacturing Standards
• Brand new state-of-the-art manufacturing plant with computer-controller market-leading technology.
Defect	Inspection Level	AQL
Pinholes (FDA 1000ml watertight test)	Level 11	1.5
Visual Defects (major)	S-4	1.5
Visual Defects (minor)	S-4	2.5
Dimensions	S-2	4.0

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Tensile Strength (Mpa) ASTM Minimum Requirement

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Ultimate Elongation ASTM Minimum Requirement

*No sensitizing threshold. Any individual with proven hypersensitivity to natural rubber latex should consult a physician before using any latex product.

PRINT PAGE